Any sort of work which includes an exposure to electrical circuits and equipment involves its own set of risks. Particularly, electricians are exposed to these hazards on a regular basis. We commonly know that electric shock is the only danger electricians are exposed to, but little do we know that electric arc explosion is an equally perilous threat, which can generate blistering heat called arc flash that can cause lethal injuries. read more
How To Disconnect THOMAS Coupling From Induction Motor Hub?
08/08/2016 by 1 Comment
Hi,
This post I would like to share video how to disconnect or dis-engage THOMAS Coupling from motor hub during maintenance works.In this video,technician plan to replace new bearing for the motor due to abnormal sound detected from bearing.Normally in industry or chemical plant,Thomas Coupling is the one of common application to connect electric motor as a drive and pump as a rotary equipment for the process.
The main reason why Thomas coupling are used :-
- To transmit power from one shaft to another, efficiently and effectively.
- To accommodate slight shaft misalignment which develop in service.
Thomas coupling application also can protect our equipment from mechanical damage and misalignment. Below several protection when using Thomas coupling :-
1. Absorb shock, vibration and pulsations.
2. Decrease cross load on bearings.
3. Accept load reversals.
4. Minimize backlash. Read More
How To Setup and Programming Endress+Hauser PROSONIC Clamp-On Ultrasonic Flow Meter
27/07/2016 by Leave a Comment
Do you familiar with ENDRESS+HAUSER brand?This time I would like to share about How to setup and programming the PROSONIC Clamp-On Ultrasonic Flow Meter.Also I have attached with video from ENDRESS+HAUSER,method and detail step how to setup the program for PROSONIC Clamp-On Ultrasonic Flow Meter.It very user friendly and easy to setup.
This is basic information about Endress+Hauser Prosonic Clamp-On Ultrasonic Flow Meter :-
The measuring device described in these Operating Instructions is to be used only for measuring the flow rate of liquids in closed pipes.
Examples:
• Acids, alkalis, paints, oils
• Liquid gas
• Ultrapure water with low conductivity, water, wastewater Read More
Safety signs
11/06/2011 by 1 Comment
Every person who involved or worked at factory or plant very regular with safety sign.It are displayed around the working area to inform workers of the regulation and rules when working in hazardous area.
Safety sign also educated the workers how to perform the task in safety condition.It also gave a big impact to workers to always follow safety rules and can reduce incident at working area.
For the new workers and not familiar with real working condition,safety sign is the main guidance to do the jobs in proper and safety condition.So i hope with my post can expose the basic of safety sign meaning and purpose at our working area. read more
Flashlight
16/09/2010 by 4 Comments
Pocket Sabre™ 1820 Flashlight
I have a 1 unit flashlight to used in my electrical works.It is very important when doing work in the control panel or distribution panel because this area less of light exposure.It very dangerous if we do the work in the dark and can cause electric shock accident.
I`m Using the flash light from Pelican brand because it is durable,heavy duty,resistance from chemicals,corrosion and water.It have a white beam can penetrates any hazardous situation.It also submersible,Explosion proof and powered by 2c alkaline battery.
