How To Setup and Programming Endress+Hauser PROSONIC Clamp-On Ultrasonic Flow Meter

Do you familiar with ENDRESS+HAUSER brand?This time I would like to share about How to setup and programming the PROSONIC Clamp-On Ultrasonic Flow Meter.Also I have attached with video from ENDRESS+HAUSER,method and detail step how to setup the program for PROSONIC Clamp-On Ultrasonic Flow Meter.It very user friendly and easy to setup.

This is basic information about Endress+Hauser Prosonic Clamp-On Ultrasonic Flow Meter :-

The measuring device described in these Operating Instructions is to be used only for measuring the flow rate of liquids in closed pipes.
Examples:
• Acids, alkalis, paints, oils
• Liquid gas
• Ultrapure water with low conductivity, water, wastewater 
As well as measuring the volume flow, the sound velocity of the fluid is also always measured. Different fluids can be distinguished or the fluid quality can be monitored. Resulting from incorrect use or from use other than that designated the operational safety of the measuring devices can be suspended. The manufacturer accepts no liability for damages being produced from this. (*INFO FROM ENDRESS+HAUSER USER MANUAL)

For More detail,Please visit :- http://www.products.endress.com/flow

 

VIDEO HOW TO SETUP AND PROGRAMMING THE ENDRESS+HAUSER PROSONIC CLAMP-ON ULTRASONIC FLOW METER :

Speak Your Mind

*